UNIVERSAL ENERGY METER – FACTORY CONFIGURED

$540.00

Model: M-3Y-600-MB

This universal energy meter from CCS measures bi-directional energy (kWh), power (kW demand), voltage, current, power factor, and 90+ Modbus registers. This Wide-Range meter will be factory configured to operate on Wye electrical services type from 120 to 600 Vac, single-phase or three-phase with neutral. It can be powered line-to-neutral or line-to-line. This meter communicates with FUSION using Modbus® RTU over an RS-485 network.  This meter is factory programmed thus the CT rating, electrical service type, Modbus address and baud rate will be configured by our factory qualified personnel before units are shipped to your facility.  Note that this factory configured energy meter requires neutral connection and CT.

 

Model: M-3D-480-MB

This universal energy meter from CCS measures bi-directional energy (kWh), power (kW demand), voltage, current, power factor, and 90+ Modbus registers. This Wide-Range meter will be factory configured to operate on Delta electrical services type from 208 to 480 Vac, single-phase or three-phase, Delta models (3D in part number) work either with or without a neutral connection, but require a line-to-line voltage connection for operating power This meter communicates with FUSION using Modbus® RTU over an RS-485 network.  This meter is factory programmed thus the CT rating, electrical service type, Modbus address and baud rate will be configured by our factory qualified personnel before units are shipped to your facility. Note that this factory configured energy meter does not requires neutral connection.

Clear
SKU: N/A Category:

Description

  • Use only with 0-333mV current transformer
  • UL 61010 and FCC certified meters
  • Possible measurement are:
    • True RMS power – Watts (phase A, B, C, and sum of all phases)
    • Reactive power – VARs (phase A, B, C, and sum of all phases)
    • Power factor (phase A, B, C, and sum of all phases)
    • True RMS energy – Wh kWh (Phase A, B, C, and sum of all phases)
    • Reactive energy – VAR-hours (Phase A, B, C)
    • AC line frequency
    • RMS voltage (Phase A, B, C)
    • RMS current (Phase A, B, C)
    • Demand & peak demand

Additional information

Options

ENERGY MODULE M-3Y-600-MB, ENERGY MODULE M-3D-480-MB