Fusion RTU for Telecom Facility Alarms
Get all telecom facility alarms to the NOC. Telecom-grade SNMP monitoring solution. Get real-time alarms & monitoring data.
FIRM Suite – Battery Management System
FIRM Suite’s Battery Management System is the first telecom facility management software that simplifies how batteries are tested, data is analyzed and batteries are replaced.
Fusion RTU for Telecom Remote Monitoring
Telecom-grade SNMP remote monitoring and control solution. Always know what’s going on in your telecom facility.
Thermal Runaway Detector – FCCP
Detect potential battery degradation before getting into a thermal runaway. Always be aware of a battery state of health (SOH) and be notified in time of potential battery degradations.
FIRM Suite – Software for Capacity Management
Perform capacity management of your telecom facility power & cooling equipment. Eliminate risk of future power embargo and always know the impact of adding loads.
Battery Monitoring – Discharge Detector
Simple, reliable and non-intrusive battery monitoring system providing an auxiliary “Battery On Discharge” alarm when a telecom stationary battery system is in discharge mode.
Capacity Management & Planning
Are you about to exceed capacity & utilization threshold on your power or cooling equipment? Our solutions will help monitor critical equipment, provide threshold crossing alerts and tell you at which date you'll need to add capacity.
Battery Backup Monitoring & Management
Battery backup is an important part of your telecom network's resiliency in case of a power outage, how comfortable are you with the state of your battery network? Our solutions will help you replace any defective battery & accurately calculate battery backup reserve time.
Telecom Facility Alarms & Monitoring
Make sure you have complete visibility of your telecom facility's most important assets by monitoring critical points and delivering alarms to the NOC in real-time. Dispatch on good information, manage capacity of your power infrastructure and more.
Easily and accurately control building HVAC systems, replace manual and electromechanical controls in retrofits and new building applications. Minimize the amount of energy used to operate fans and preheat or cool ventilation air.
Server collecting the data coming from up to 48 various MODBUS RTU devices and distributing it as you configure the unit. Map data from energy meters, generator controllers and building management systems to SNMP. The SNMP manager performs SNMP Get to retrieve contents of any mapped MODBUS register.